Error Codes

Most problems in ProSelect show a plain message that explains what went wrong. Some messages also include a short code, such as Error Code B1099. The code tells our support team exactly which step ProSelect was on when the problem happened. You don't need to understand the code to fix the problem, but this page explains what each kind of code means and what to try first.

If you need help, submit a support ticket and include:

  • The full code, exactly as shown, including the letter (for example, B1099).
  • What you were doing when the message appeared (opening an album, saving, exporting a slideshow, and so on).
  • Where the album is stored (on your computer, an external drive, a network drive, or a cloud folder such as Dropbox).

If ProSelect shows a "Sorry, a Program Error Has Occurred" message instead, see Debug Log.

Album Error Codes

Album error codes are the ones you are most likely to see. They appear in a "Sorry, there was a problem..." message when ProSelect can't create, open, or save an album.

The letter tells you what ProSelect was doing:

Letter What you were doing
A Starting a new album (File > New Album)
B Opening an album
C Saving an album
D Saving an album with a new name or location (File > Save Album As)
E Returning to your album after a save could not finish
F Saving a new album for the first time
G Saving an album from an older version of ProSelect in the current format

The number tells support which step failed.

  • Album codes always have at least four digits after the letter. If your code looks shorter, such as B100, check the message again. A digit has probably been missed (B100 could be B0100 or B1000).
  • A five-digit number, such as B11099 or C10230, means something unexpected happened. Take away 10000 to find the step ProSelect had reached: B11099 happened during step B1099. E codes are different: they always have five digits.
  • A code always means a real problem. If you click Cancel while ProSelect is working, it stops without showing a code.
What to Try First

Almost every album error is caused by a problem reaching or writing to the album file, rather than by ProSelect itself. Work through these checks:

  1. Is the album on a network drive, external drive, or cloud folder? If the drive disconnected, or a cloud service such as Dropbox, OneDrive, iCloud Drive, or Google Drive was syncing or locked the file, ProSelect can't finish. Reconnect the drive or let the sync finish, then try again. See Storing Albums in a Cloud Location.
  2. Is the disk full or read-only? Check there is free space on the disk that holds the album, and on your computer's main disk, where ProSelect keeps a temporary working copy of the open album.
  3. On a Mac, does ProSelect have permission to use the folder? Go to System Settings > Privacy & Security, then check that ProSelect is allowed under Files & Folders and Full Disk Access.
  4. Copy the album to your desktop and open the copy. If the copy opens and saves normally, the problem is with the original location (the drive, the network, or permissions). If the copy shows the same code, the album file itself is probably damaged.
  5. Quit and restart ProSelect, then try again. If the problem continues, restart your computer.

If the album file is damaged, ProSelect may be able to recover your recent changes from an Auto Backup. Pro Studio Software support can often rebuild album data using ProSelect Album Recovery Files (PSARF).

Code What ProSelect was doing
A0100 - A0600 Closing the album you had open
A0700 Creating the new, empty album
A0900 - A1000 Getting the new album ready to use
A10000 - A11000 Something unexpected happened (take away 10000 to find the step)

Code What ProSelect was doing
B0100 - B0800 Closing the album you already had open, before opening the new one. The problem is usually with the album you were leaving, for example, its drive has disconnected. Restart ProSelect and open the album again.
B0810 - B0885 Restoring the album from an auto backup
B0900 Opening the album file you chose
B1000 - B1099 Checking that the album file is complete. B1099 usually means the album file is damaged.
B0010 - B0050 Loading the album's details or thumbnails
B1110 - B1140 Reading the album's list of images. B1110 can also mean the list came back empty, which usually means the album file is damaged.
B1410 - B1460 Loading the individual images
B1610 - B1630 Loading products
B1710 - B1730 Loading books
B1810 - B1850 Loading the resource images stored in the album
B1850 - B1895 Loading room designs
B1910 - B1970 Loading orders
B2095 Loading slideshows. This one is not serious: the album still opens, but its slideshows are reset to the defaults.
B2100 - B2200 Finishing opening the album
B10000 and up Something unexpected happened (take away 10000 to find the step)

Apart from B2095, a B code means the album did not open.

Code What ProSelect was doing
C0050 Checking the album file before saving
C0110 - C0140 Saving thumbnails of images, products, book pages, and room designs
C0210 - C0290 Saving the album's information (see below)
C0300 Clearing auto backup data, now that the album is being saved properly
C0400 Checking the album's image information
C0510 - C0540 Gathering the resources the album uses
C0600 Storing the frames the album uses
C0650, C0950, C1250 Saving StudioCloud event details. These codes can appear during any kind of save.
C0700 Writing the changes to disk
C0910 - C0940 Finishing the save
C1010, C1090 Tidying up the resource images stored in the album
C10000 and up Something unexpected happened (take away 10000 to find the step)

For codes C0210 to C0290, the third digit shows which part of the album was being saved: 1 images, 2 books, 3 products, 4 orders, 5 resources the album uses, 6 room designs, 7 slideshows, 8 resource images stored in the album, 9 client room images. For example, C0240 means ProSelect could not save the album's orders. The same pattern applies to D0910 - D0990, F0210 - F0290, and G0610 - G0690.

Code What ProSelect was doing
D0100 - D0400 Closing the album before copying it
D0600 - D0750 Making a temporary copy of the album
D0810 - D1200, D2210, D2290 Saving the album's thumbnails, information, and resources into the copy
D1300 - D1400 Finishing the temporary copy
D1600 Copying the album to the location you chose. Check that location has free space and that ProSelect can write to it.
D1700 - D2000 Opening the album in its new location
D2110 - D2140 Finishing the save
D10000 and up Something unexpected happened (take away 10000 to find the step)

If Save Album As does not finish, ProSelect automatically goes back to your original album. If that also fails, you will see an E code.

E codes appear straight after a save that could not finish (Save Album As, saving a new album for the first time, or saving an older album in the current format). ProSelect tried to reopen the album you were working on and couldn't.

This usually means the original album's location is no longer available. For example, a network or external drive has disconnected, or ProSelect has lost permission to use the folder. Reconnect the drive, check the permissions in What to Try First above, then open the album again.

Code What ProSelect was doing
E20000 - E20400 Reconnecting to your original album
E30000 - E30400 Something unexpected happened while reconnecting

Code What ProSelect was doing
F0050 - F0700 Saving everything into the album
F0800 Closing the album
F0900 Copying the album to the location you chose. Check that location has free space and that ProSelect can write to it.
F1000 Opening the album in its new location
F1210 - F1240 Finishing the save
F10000 and up Something unexpected happened (take away 10000 to find the step)

G codes appear when ProSelect saves an album made in an older version of ProSelect in the current album format.

Code What ProSelect was doing
G0200 - G0300 Creating the new album
G0400 Checking the save location. ProSelect could not save the new album there; try a different name or folder.
G0510 - G1100 Copying the images, information, and resources from the old album into the new one
G1300 Closing the new album
G1400 Copying the new album to the location you chose
G1500 Opening the new album
G1710 - G1740 Finishing the save
G10000 and up Something unexpected happened (take away 10000 to find the step)
Other Error Codes

"Unable to export movie to [file name] (Error code: [number])"

ProSelect could not create the movie file. Check there is free space where you are saving the movie, then export again. Error code 1 means the export finished but the movie file was not created. Other numbers tell support which part of the export (the video or the music) failed. See Exporting Slideshows.

"There was a problem initializing the Metal framework on your computer..." followed by a number

Your Mac's graphics system could not start the slideshow. This often means the computer is short of free memory. Quit other applications, or restart your computer, then try again. If it keeps happening, contact support with the number shown.

"Misc. Communications Error. (Code: [number])"

ProSelect could not communicate with the ProSelect Network Server. Click Try Again, or click Turn Off Sharing to keep working on this computer. The codes you are most likely to see are:

Code Meaning
1 The server is busy. Wait a moment and try again.
13 The server took too long to respond.
15 ProSelect and the Network Server are different versions. Update both to the same version.
16 The server could not be found. Check that the server computer is on and the Network Server is running.

"Connect to Photoshop Error" with General Error 3, 4, 5, or 6

ProSelect sent Photoshop a test and did not get a proper reply. Make sure Photoshop is installed and opens normally, then restart both ProSelect and Photoshop. On a Mac, also check that ProSelect is allowed to control Photoshop in Allowing Permissions.

  • General Error 3: Photoshop did not send a reply.
  • General Error 4: Photoshop's reply was empty.
  • General Error 5 or 6: ProSelect could not read Photoshop's reply.

"Retouching Warning - Error Code..."

There was a problem applying a pretouching or retouching preset to an image. See Pretouching Errors.

"QR Error Code: [number]"

ProSelect could not create the QR code. Contact support with the number shown.

"Unable to Restore from Previous Version file (Error [number])" or "Unable to Restore from Backup file (Error [number])"

These appear in the Reset ProSelect window when restoring your ProSelect data file.

  • Error 1: ProSelect could not find where your ProSelect data file is kept.
  • Error 2: The previous version or backup file you selected no longer exists.

Contact support for help with either one.

"Error Copying File: [file name] (Error #[number])"

This number comes from your computer's operating system, not from ProSelect. It usually means the destination drive is full or disconnected, ProSelect doesn't have permission to write there, or the file is open in another application.